THIS TONER CARTRIDGE DOES NOT CONTAIN THE DRUM UNIT.  THE IMAGING DRUM IS SEPARATE FROM THE TONER CARTRIDGE.

 

Not Recognizing

 

Verify they have the correct cartridge for their specific printer model.

 

Make sure the cartridge is installed correctly and is fully inserted into the printer.

 

To remove and install the toner cartridge into a Toshiba BD-1370 machine do the following;

–          Pull open the front cover.

 

–          Push the toner release button and pull the toner cartridge from the machine.

 

–          Insert the new toner cartridge into the slot.  Push until it clicks into place.

 

–          Close the front cover to the printer.

 

Print Quality Issues

 

There is a seal tape covering the toner shutter which must be removed prior to installation.

 

Gently shake the toner cartridge from side to side to loosen the toner powder inside.  Sometimes, the toner can become compacted inside the cartridge.

 

Lines, streaking, ghosting, and repeating image defects are drum related issues.  The imaging drum is separate from the toner cartridge.

 

Not Fitting

 

Verify they have the correct cartridge for their specifc printer model.  Make sure the tape seal has been removed from the cartridge.  Verify they cartridge is being installed in the correct orientation.  Check inside the printer for any obstructions.  Check the cartridge itself for physical damage.