DISCONTINUED:  Aug 1, 2013

DO NOT RESHIP

 

THIS TONER CARTRIDGE DOES NOT HAVE INTEGRATED DRUM UNIT.  THE DRUM IS A SEPARATE UNIT FROM THE TONER CARTRIDGE.

 

Not Recognizing

 

Verify you have the correct cartridge for your specific printer model.

 

Make sure that the toner cartridge is fully locked into place in the printer and fully seated.

 

To remove and install this toner cartridge into a Ricoh FT-4415 do the following;

–          Open the front cover.

 

–          Push the developer lock lever upward and pull toner cartridge out a little.

 

–          Grasp the toner cartridge with both hands and remove it from the printer.

 

–          Using both hands insert the new toner cartridge into the printer.

–          Close the front cover.

 

Print Quality Issues

 

There’s a pull tape seal which must be removed from the cartridge.

Try rocking the cartridge back and forth a few times to redistribute the toner powder inside the cartridge.

 

Ghosting, lines, streaking, and repeating defects will be a drum related issue.  The drum unit is separate from the toner cartridge and is a replaceable, maintenance item.  After a certain period of usage the drum will need replacing.

 

Not Fitting

 

Verify you have the correct cartridge for your specific printer model.  Check inside the printer for any obstructions.  Check the cartridge itself for physical damage.  Make sure any seals have been removed from the cartridge.