THIS TONER CARTRIDGE DOES NOT HAVE INTEGRATED DRUM UNIT.  THE DRUM IS A SEPARATE UNIT FROM THE TONER CARTRIDGE.

Not Recognizing

 

Verify you have the correct cartridge for your specific printer model.

 

Make sure that the cartridge is fully inserted into the printer and that the cartridge is locked into place.

 

To remove and install this toner cartridge into a Sharp AL-200 do the following;

–          Open the bypass tray.  Lift slightly on the side cover and slide the cover out until it stops.

 

–          Push gently on both sides of the front cover to open the cover.

 

–          Lift the TD cartridge lock release lever and pul lthe cartridge out until the green strap handle can grasped by the right hand.  Lift the cartridge by the handle while supporting it with the left hand at the green label position to remove it.

 

–          Gently insert the TD cartridge along the guides until it locks in place.

 

–          Close the front cover by pushing both sides with your hands and then close the side cover by pressing the handle on the cover.

 

Print Quality Issues

 

There is a white plastic protective cover which must be removed from the front of the cartridge.

 

Hold the cartridge on both sides and shake it horizontally 4 or 5 times.

 

Streaking, lines, ghosting, and repeating image defects are drum related issues.  The drum unit is a separate, replaceable, maintenance item.

 

Not Fitting

 

Verify you have the correct cartridge for your specific printer model.  Make sure the cartridge is fully inserted and locked.  Check inside the printer for any obstructions.  Check the cartridge itself for physical damage.