THIS TONER CARTRIDGE DOES NOT HAVE INTEGRATED DRUM UNIT. THE DRUM IS A SEPARATE UNIT FROM THE TONER CARTRIDGE.
Not Recognizing
Verify you have the correct cartridge for your specific printer model. This is a very basic toner cartridge and does not contain a smart chip or electronics of any kind.
To remove and install the toner cartridge into a Ricoh MP 2001/2501 do the following;
– Open the front cover of the machine and lift the green lever
– Push the green lever, and then gently pull out the holder.
– Press the toner bottle back to raise its top, and then gently pull it out.
– Hold the new bottle horizontally and shake it from side to side five or six times. Remove the black cap.
– Put the toner bottle on the holder, and then pull its top forward.
– Push in the green lever until it clicks.
– Press down the green lever. Close the machine’s front cover.
Print Quality Issues
Ghosting, lines, streaking, and repeating defects will be a drum related issue. The drum unit is separate from the toner cartridge.
Not Fitting
Verify you have the correct toner cartridge for your specific printer model. Check inside the printer for any obstructions. Check the cartridge itself for physical damage. Make sure the black cap was removed from the cartridge.
0 Comments